Current Products:

• Jackal Unit Manuals
  1. Jackal Manual Ver 1.4 (1024Kb 17/01/2019 )
     Manual for Jackal Excess Energy Diverter.
• PLW Unit Manuals
  1. PLW Manual Rev 10 (1020Kb 15/10/2020 )
     Manual for PLW PV Solar Hot Water MPPT Controller.
  2. PLW Manual - Obsolete Ver 9 (1017Kb 02/12/2019 )
     Manual for PLW PV Solar Hot Water MPPT Controller.
• DINGO Unit Manuals
  1. Dingo8040N Data Sheet (189Kb 29/03/2019 )
     Data Sheet for the Dingo8040N Negative Ground Regulator.
  2. Dingo8040N User Guide Ver 1.0 (818Kb 03/10/2017 )
     User guide for the Dingo8040N Negative Ground Regulator. Contains basic information on how to connect the Dingo8040N regulator in a system and how to operate the unit.
  3. DRC: Dingo Series Remote Control Manual Ver 1.0 (521Kb 23/05/2014 )
     User guide for the DRC (Dingo Series Remote Control).
  4. Dingo2020N User Manual Ver 1.55c (1040Kb 24/10/2018 )
     User guide for the Dingo2020N Negative Ground Regulator. Contains basic information on how to connect the Dingo2020N regulator in a system and how to operate the unit.
  5. Dingo4040P User Manual Ver 3.1 (961Kb 03/10/2017 )
     User guide for the Dingo4040P Positive Ground Regulator. Contains basic information on how to connect the Dingo4040P regulator in a system and how to operate the unit.
  6. DSA Ver 3.1 (96Kb 16/09/2019 )
     User Information for the DSA bi-directional external shunt adapter (for connection to external shunts from a DINGO regulator). Also contains diagram for connecting multiple DSA units in a system.
  7. DUSB Ver 1.0 (81Kb 16/04/2009 )
     User Information for the DINGO USB interface (for connection to PC from a DINGO regulator). Requires new communications software PRISM for PC.
  8. D232 Ver 1.0 (86Kb 16/04/2009 )
     User Information for the DINGO Serial interface (for RS232 connection to Modem or older PC from a DINGO regulator). Requires new communications software PRISM for PC.
  9. DNET Dingo Ethernet Interface, Ver 2.2 (171Kb 14/9/2014 )
     Reference manual for the Dingo DNET, Ethernet Interface supporting HTTP (Browser), SNMP, and Modbus over TCP
  10. DNET Mechanical Diagram and LED Indicators Dingo Ethernet Interface Diagram Ver 1.1 (105Kb 25/01/2019 )
      DNET Mechanical Diagram and LED Status Indicators
  11. Dingo2020N Reference Manual Ver 1.7 (2.6M 03/10/2017 )
      Reference manual for the DINGO Negative Ground Regulator. For firmware version V43 and later.
      This manual requires some technical knowledge and may be confusing for the non-technical user.
  12. Dingo4040P Reference Manual Ver 1.4 (3.1M 27/07/2018 )
      Reference manual for the DINGO Positive Ground Regulator.
      This manual requires some technical knowledge and may be confusing for the non-technical user.
  13. DT/DTB Ver 1.03 (582Kb 24/7/2009 )
      Wiring instructions for the DINGO battery temperature sensor. DT is plastic encased, while DTB is housed in a bolt-on metal lug (no electrical connection to lug).
      PLEASE NOTE: PL temperature sensors (PLT and PLTB) are not compatible with Dingo regulators.
• PL Unit Manuals
  1. PL80e_data_sheet Data Sheet (186Kb 29/03/2019 )
     Data Sheet for the PL80e Positive Ground Regulator.
  2. PL80e User Guide Rev 8e (568Kb 19/09/2017 )
  3. PL60 / PL80 User Guide Ver 6.0 (420Kb 16/07/2014 )
  4. PL User Manual Ver 9.0324 (693Kb 22/10/2009 )
     User guide for the PL range of regulators. Contains basic information on how to connect the PL regulator in a system.
  5. PLI Ver 4.2 (82Kb 01/06/2017 )
     User Information for the PLI Serial interface. (For connection to PC or Modem from a PL regulator).
  6. PLS2 Ver 2.1 (418Kb 10/03/2008 )
     User Information for the PLS2 bi-directional external shunt adapter. (For connection to external shunt from a PL regulator). Also contains diagram for connecting multiple PLS/PLI units.
  7. PLA Ver 1.5 (174Kb 13/10/2005 )
     User information for the PLA Alarm unit, for up to three PL regulators on one battery bank. The PLA ensures that the PL regulators synchronise with each other. It also incorporates up to four external alarms and a controller for an external load disconnect switch, and an RS232 interface.
  8. PL Reference Manual Ver 6.4.0 (2.1M 15/07/2020 )
     Reference manual for the PL range of regulators.
     This manual requires some technical knowledge and may be confusing for the non-technical user.
  9. PLM Manual Ver 2.12 (3.6Mb 3/7/2008 )
     Reference Manual/Specifications for the PLM
• PR Unit Manuals
  1. PR 1210 Instructions (432Kb 8/4/2006 )
     Instructions for the PR1210 12volt 10amp regulator for liquid electrolyte batteries. This is a basic regulator with no screen or lights, total size about 65mm x 37mm x 20mm
  2. PR 1210L Instructions (445Kb 8/4/2006 )
     Instructions for the PR1210L 12volt 10amp regulator for sealed or gel electrolyte batteries. This is a basic regulator with no screen or lights, total size about 65mm x 37mm x 20mm
  3. PR 2410 Instructions v1.2 (353Kb 17/6/2010 )
     Instructions for the PR2410 24volt 10amp regulator for liquid electrolyte batteries. This is a basic regulator with no screen or lights, total size about 65mm x 37mm x 20mm
  4. PR 2410L Instructions v1.1 (333Kb 17/6/2010 )
     Instructions for the PR2410L 24 volt 10amp regulator for gel or sealed electrolyte batteries. This is a basic regulator with no screen or lights, total size about 65mm x 37mm x 20mm
• SPS Unit Manuals
  1. SPSD-ENET Browser Based Interface User Guide (273Kb 12/12/2008 )
  2. SPS12D100B (1.4M 28/09/2009 ) 100A CHARGE 50A LOAD POSITIVE GROUND
  3. SPS12D100NB (1.7M 13/05/2009 ) 100A CHARGE 50A LOAD NEGATIVE GROUND
  4. SPS12D200B (1.4M 13/05/2009 ) 200A CHARGE 50A LOAD POSITIVE GROUND
  5. SPS24D75B (1.4M 12/03/2008 ) 75A CHARGE 50A LOAD POSITIVE GROUND
  6. SPS24D100B (1.4M 18/11/2009 ) 100A CHARGE 50A LOAD POSITIVE GROUND
  7. SPS24D100NB (1.7M 7/12/2007 ) 100A CHARGE 50A LOAD NEGATIVE GROUND
  8. SPS24D200B (1.4M 13/05/2009 ) 200A CHARGE 50A LOAD POSITIVE GROUND
  9. SPS24D200NBR (2.1M 27/08/2008 ) 200A CHARGE 250A LOAD (INT) NEGATIVE GROUND RACK MOUNT
  10. SPS24D200NB (1.7M 16/06/2009 ) 200A CHARGE 50A LOAD NEGATIVE GROUND
  11. SPS24D250B (1.4M 12/03/2008 ) 250A CHARGE 70A LOAD POSITIVE GROUND
  12. SPS48D75BSWA (503Kb 8/02/2008 ) 75A CHARGE 50A LOAD POSITIVE GROUND GENERATOR CONTROL
  13. SPS48D75B (1.4M 12/03/2008 ) 75A CHARGE 50A LOAD POSITIVE GROUND
  14. SPS48D100B (1.4M 13/05/2009 ) 100A CHARGE 50A LOAD POSITIVE GROUND
  15. SPS48D100NB (1.7M 21/09/2009 ) 100A CHARGE 50A LOAD NEGATIVE GROUND
  16. SPS48D200BR (1.7M 12/03/2008 ) 200A CHARGE 60A LOAD POSITIVE GROUND RACK MOUNT
  17. SPS48D200BR (1.7M 13/05/2009 ) 200A CHARGE 50A LOAD POSITIVE GROUND RACK MOUNT
  18. SPS48D200B (1.4M 12/05/2009 ) 200A CHARGE 50A LOAD POSITIVE GROUND
  19. SPS48D200NB (1.7M 13/05/2009 ) 200A CHARGE 50A LOAD NEGATIVE GROUND
  20. SPS48D250B (V.1) (1.4M 9/11/2007 ) 250A CHARGE 70A LOAD POSITIVE GROUND
  21. SPS48D250B (V.2) (1.4M 19/10/2009 ) 250A CHARGE 70A LOAD POSITIVE GROUND
  22. SPS48D300B (1.4M 19/10/2009 ) 300A CHARGE 70A LOAD POSITIVE GROUND
  23. SPS48D300NB (516Kb 7/08/2008 ) 300A CHARGE 70A LOAD NEGATIVE GROUND

Archived Manuals:

• DINGO Unit Manuals
  1. Old Dingo2020N User Manual Ver 1.1 (798Kb 20/01/2009 )
     User guide for the Dingo2020N Negative Ground Regulator. Contains basic information on how to connect the Dingo2020N regulator in a system and how to operate the unit.
  2. Old Dingo4040P User Manual Ver 1.1 (952Kb 18/06/2013 )
     User guide for the Dingo4040P Positive Ground Regulator. Contains basic information on how to connect the Dingo4040P regulator in a system and how to operate the unit.
  3. Old Dingo2020N Reference Manual Ver 1.5 (2.6M 14/9/2014 )
     Reference manual for the DINGO Negative Ground Regulator. For firmware version V42 and later.
     This manual requires some technical knowledge and may be confusing for the non-technical user.
  4. Old Dingo4040P Reference Manual Ver 1.2 (3.1M 06/06/2013 )
     Reference manual for the DINGO Positive Ground Regulator.
     This manual requires some technical knowledge and may be confusing for the non-technical user.
  5. OldDSA Ver 2.2 (552Kb 20/10/2010 )
     User Information for the DSA bi-directional external shunt adapter (for connection to external shunts from a DINGO regulator). Also contains diagram for connecting multiple DSA units in a system.
• PL Unit Manuals
  1. OldPL Reference Manual Ver 6.2.0 (2.6M 27/7/2008 )
     Reference manual for the PL range of regulators.
     This manual requires some technical knowledge and may be confusing for the non-technical user.
  2. OldPL Reference Manual Ver 6.3.1 (2.M 12/02/2019 )
     Reference manual for the PL range of regulators.
     

  Obsolete Products:

  • PC Unit Manuals
    1. PC1212, PC1222 and PC1230
       User guide for these models. Includes specifications, features, and basic instructions.
    2. PC2412, PC2422 and PC2430
       User guide for these models. Includes specifications, features, and basic instructions.
    3. PC Series Technical Manual
       Technical manual for the PC series of Plasmatronics regulators.
  • LC Unit Manuals
    1. LC1212, LC1222 and LC1230
       User guide for these models. Includes specifications, features, and basic instructions.
    2. LC2412, LC2422 and LC2430
       User guide for these models. Includes specifications, features, and basic instructions.
  
  
  

  Home

  Regulators

  Developments

  Specifications

  Downloads

  Suppliers

  Resources

  No Frames